Talon2 cabling: current links and the 2 cables to add
Talon2 (ASUS ESC8000-E11). PCIe slot → card from the BIOS slot table (dmidecode -t slot, read 2026-11-10). Links measured by link beacons (2026-10-23) and QSFP module presence (2026-11-09 cable check, commit 82daf89eb). Orange dashed = cable to plug in.
Calculations and hypothesis:
- Physical left-to-right order is an assumption, from the user's note that the H200 sits in the leftmost slot (PCIE8). The view assumes slots run PCIE8 → PCIE1 left to right, as seen from the side where you plug the cables. Check against the slot labels printed on the board before plugging.
- Cage numbers c0–c3 are the link layer's cage index. Their physical top-to-bottom position on the V80 bracket has not been verified. After plugging, a link beacon confirms each end; I re-run that check before anything is flashed.
existing cable (measured)missing cable (plug in)empty cage
The two cables to add
| # | From | To | Why |
|---|---|---|---|
| 1 | card 3d (slot PCIE3), cage 1 | card e1 (slot PCIE7), cage 1 | Closes the ring of the 4 attention cards (17–3d–e1–bd–17). Today they form only a chain. |
| 2 | card bd (slot PCIE5), cage 1 | card 50 (slot PCIE2), cage 1 | Connects attention card bd to its MLP card 50. Today bd has no link to any MLP card. |
All four cages are empty today, so it is plug-in only; nothing has to be unplugged.
Slots and roles
| Slot | PCIe address | Card | Role in the 6/7-card drafter |
|---|
Existing cables (measured)
| Card · cage | Card · cage | Use |
|---|
Sources: TRACKLIST_20260923.md:464 (measured cage map), reports/results/SEVENCARD_BOARD_20261026/CABLE_CHECK_20261109.md, reports/results/BATCH_BUBBLES_20261109/SEVENCARD_MLPV_0x134D_20261109.md (rank → cage plan). 2026-11-10, box1-qwen-junior.